TIPS ABOUT HOW TO Extend Smok Pen Recharge Time


TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is a new pen that was created by two guys in California. They wanted to create a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.

smok pen

The Smok Pen has a built quality that is just great. I found that even though it can be an electronic pen the construction is simply as good as any of the pens that I have reviewed. For the reason that of how they made the most notable cap. You don’t need to be worried about the cap cracking or breaking you Smok Valve Pen.

The two biggest differences that separate the Smok Valve from other pens is vapinger.com the form of the coils and just how that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I think that they did this deliberately, to help make the pen feel more substantial.

Invest the a look at a Smok Pen, you will observe that the body of the pen is round rather than smooth like other pens. On the trunk of the pen there exists a little tab that houses the coil. When you press on the tab you can easily turn the heating element on and off. I really liked this feature because it allows me to use the Smok Pen 22 whenever I feel like smoking.

To use the Smok Pen it is advisable to keep the heat button pressed. After the button is pressed, the heating element will start to warm up. Once it gets to the appropriate temperature it is possible to switch off the heating element. Smok recommends utilizing a 22mm tank. I prefer a more substantial tank, but that’s just me.

When you put your Smok Pen into the tank you will see a indicator light seriously. The indicator light will remain green if you don’t put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is very important always put your pen in to the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.

After you have completed this step, it is best to check to see should you be at the proper temperature for the coils to fire. If not then you should turn the power off and try again. When you are still not satisfied together with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is what I would call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the following two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.

Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body that is green in color. You need to loosen this wire using pliers. When you have loosened this wire you can then access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful to not touch the coils.

Once you have placed the sub-ohm tank into the pen you should then place all of those other components like the wattage, the batteries and the heating element into the included microwaveable microwave oven. Turn on the energy and follow the on screen instructions. You need to place the pen’s battery in to the microwave and activate the setting. You should then wait approximately 30 seconds before turning it cool off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.

Once the Smok Pen has reached the temperature that it requires to reach you need to then connect both wires to the negative and positive on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to underneath of the Smok’s power switch.

After all of the components have been placed into the pen, you should turn the energy on. After the first test run, you ought to be able to start to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you should remove the battery from the pen and then replace it with a fresh one. For your convenience there is also a green light that can be pressed to be able to confirm the battery charging status. Once you have done these things and you also do not see the green light indicating charging, you should replace the battery.